The Pros and Cons of the Stihl 461 Chainsaw
1 comment
Shopping for parts? See all Stihl MS461 parts and download the free MS461 parts diagram.
The Stihl MS 461 is a 76.5 cc professional chainsaw built for felling and heavy ground work with long bars. Below are its specs from Stihl's service manual, its pros and cons, what it costs, and the problems owners run into most, with the part that fixes each one.
Stihl MS 461 specs
| Displacement | 76.5 cc (4.67 cu in) |
| Bore × stroke | 52 mm × 36 mm |
| Engine power | 4.4 kW (6.0 hp) at 9,800 rpm |
| Max. speed with cutting attachment | 13,500 rpm |
| Idle speed | 2,500 rpm |
| Clutch engages at | 3,500 rpm |
| Spark plug | NGK BPMR 7 A or Bosch WSR 6 F, electrode gap 0.5 mm |
| Ignition module air gap | 0.20 mm (+0.1 / −0.05 mm) |
| Oil pump | Adjustable: 6–17 cm³/min (standard pump) or up to 24 cm³/min (uprated pump) at 10,000 rpm |
Source: Stihl MS 461, MS 461-R service manual (2013).
Pros and cons of the Stihl MS 461
Pros
- 6.0 hp from 76.5 cc, enough to pull long bars in hardwood.
- Professional anti-vibration system that reduces fatigue on long days.
- Adjustable oil pump, with an uprated pump option for long bars.
- Parts are widely available, including aftermarket parts that cost much less than dealer parts.
Cons
- Price: it costs much more than a homeowner saw.
- Loud, and too much saw for light trimming.
- Needs regular maintenance (air filter, fuel filter, carburetor) to keep running right.
What does a Stihl MS 461 cost?
A new MS 461 sells for about $1,050. Northern Tool listed the 25-inch-bar model at $1,049.95 in October 2026. Used saws sell for less, so check compression and look for the problems below before you buy one.
Common MS 461 problems and the part that fixes them
| Symptom | Likely cause | Part |
|---|---|---|
| Floods and stalls | Worn inlet needle or a deformed metering diaphragm in the carburetor | Proline® carburetor for MS461 (replaces Stihl 1128 120 0629) |
| Poor acceleration, bogs | Faulty tank vent, leaking fuel hose, damaged metering diaphragm, or a clogged fuel filter | Proline® fuel filter (replaces Stihl 0000 350 3518) |
| Idle speed too high and won't settle | Leaking crankshaft oil seals | Proline® crankshaft oil seal set (replaces Stihl 9640 003 1355 and 9640 003 1600) |
| Chain turns at idle | Idle speed set too high, or stretched clutch springs | Proline® clutch spring set (replaces Stihl 0000 997 5815) |
| Misfires, loses power | Sooted spark plug (check the air filter if it keeps happening) or a loose plug boot | Genuine NGK BPMR7A spark plug (replaces Stihl 0000 400 7006) |
Causes summarized from the troubleshooting charts in Stihl's MS 461 service manual.
Alternatives to the Stihl MS 461
Saws in the same class include Stihl's MS 462 and MS 500i and Husqvarna's 572 XP. Compare weight, power and dealer support near you before you buy.
We've got you covered
If you run an MS 461, Sawzilla stocks the parts that keep it cutting, most of them under our own Proline® brand and listed with the Stihl part number they replace. Browse all MS461 parts or call 1-888-417-6099 if you need help finding the right one.
Comments (1)
I bought a 391 stihl chainsaw at bandera tx. À few months ago it was hard to start took it back 2 times they said I was not pulling hard enough I new better it would run a while and die when it would start finely it would not start at all I took it back and they said the piston and cylinder weren’t any good so I might bee out a $1000 if warranty doesn’t cover it i am not buying anymore chainsaws in bandera anymore